Motoronics Multi-Layer Board Equipment
DX-5254 X-Ray drilling machine
PRD5011 Single-axis X-ray drilling machines
LH-300 Welding Machine for Lay-Up
Even board thickness is changed, length of tape is constant. Tape length can be changed freely.
With the punching range of multilayer board. Punching head can move freely. The case of the sheet reduces the damage caused by forcibly setting the punch.
Rolling up structure of protection tape Very stable accuracy with totally pressure table!!
New Machine with the Best Cost Performance. High Speed and Easy Operation
Using the new X-ray system (X-ray CCD and X-ray generator). Corresponding to 4 spindle (Spindle).
Board Size
１２０×１２０mm～５４０×６９０mm
Table
Table change system
Board Thickness
2.0～9.0mm
Board Size
240×240mm～720×720mm （with copper）
Board Thickness
0.2 ～ 4.5mm
Alignment
Pin alignment system
Work size
250×290～610×700mm
No.of substrates set
1 to 4 sheets (1.6t) + resin + aluminum (MAX.8.02mm)
Usage
Tape-removing for NC
Drilling capacity
φ0.8～6.1
Processing data
200 types
Machinable range
X:280～700mm Y:0～600mm
Board Thickness
0.1～6.0mm
No. of holes processed
2 or more (up tp standard 8 holes)
Temperature set-up
320℃ max.
Mode
two surface, one-sided mode, multi-layer mode
Processing speed (except for timing)
Surface substrate: 3.5s Multilayer substrate: 2.5s
The tape of the remainder of the Backup board (bake board) is removed,and Bali is prevented. It is easy to use both sides of the backup board.
Board Thickness
2.0～9.0mm
Usage
Tape-removing for NC
Power supply
AC100V 50/60Hz
power consumption
8W (at one machine)
Weight
10kg (at one machine)
Dimension
130(W)×430(D)×315(H) (at one machine)
Power supply
AC100V 50/60Hz
power consumption
8W (at one machine)
Weight
7kg (at one machine)
Dimension
130(W)×430(D)×315(H) (at one machine)
No. of Alignment Mark
One-Hole Mark Centripetal
Data Input
Touch Panel Monitor
© Copyright 2018, Jadason Enterprises Ltd. All rights reserved.
